week 4 (FYP2): Briefing for FYP2 and buy component

Objective for this week: go to the briefing for FYP2 and buy new component for design and test the circuit for trolley follower.

For the briefing was meant to give some explanation to all final year projects 2 student. The briefing is about: 

• Introduction
• Objective
• Credits and duration
• Scope of project
• Title selection
• Project assessment
• Presentation day
• Submission date of project

for buy new component, i buy for this component and equipment:

1. board
2. usb cable
3. jumper
4. mini board

Week 3 (FYP2):Test Ultrasonic Sensor Distance

Objective for this week: For this week I test ultrasonic sensor using ARDUINO for check the distance and set the distance for ultrasonic sensor function.  First, using a check arduino to detect and set up which can be set and the result will be available on the system monitor screen serial arduino. 

1. first test result output to show the monitor in arduino:

In the picture above there is a reading on the test and the distance sensor on the display.

2. Second test sensor using real situation for test the distance of sensor:

This below show circuit testing sensor ultrasonic:

The 5V pin of the ultrasonic sensor is connected to the 5V pin on the board, the GND pin is connected to the GND pin, and the SIG (signal) pin is connected to digital pin 7 on the board.

This below show schematic testing sensor ultrasonic:

This video is about to testing distance ultrasonic sensor:

Week 2: Change Microcontroller and buy new microcontroller (Arduino)

Objective for this week: Change microcontroller from ATMEL AVR 8- bit to ARDUINO UNO and test ARDUINO UNO function.

For this week i do and test microcontroller. First i try microcontroller ATMEL, microcontroller ATMEL is complicate then I meet my advisor and I discuss to better microcontroller. I decided to use microcontroller ARDUINO UNO because ARDUINO is easy better then ATMEL.

Step to test function ARDUINO UNO :

1. Install ARDUINO software

2. Test design ARDUINO UNO in proteus

3. Write basic coding ARDUINO UNO to test ultrasonic sensor.

Week 1 (FYP2): New semester and update latest progress

Objective for this week: To update latest progress to the FYP advisor

For this week I met with my advisor and discuss progress for FYP2 and what should I do for this semester to complete my FYP2.

I discuss for my project and now i prepare to order this component to start my project, 

The list component i need to buy is:

1. Sensor

2. Microcontroller

3. Equipment = Trolley, Motor, and tyre controller.

Conclusion : For the conclusion on this week, i have meet my supervisor to manage the  meeting time with him and also i have get a permission from my supervisor about the idea to finalize the component that i need to use for my FYP 2

Week 14: submition the final report FYP1

Objective for this week: I had collected my submission of proposal from my advisor and do some corrections and I submit my final report for FYP1.

for this week, I have prepared a full report FYP1 and completed all items in the subject FYP1 for this semester.

Conclusion for this subject for this semester: For subject FYP1 I have chosen the title 'Development of Intelligent Shopping Trolley using microcontroller. in this semester I conduct my research project include a study of the components, circuits, design and create a report to chapter 3 of this semester, almost 40% of the project has been carried out and the rest will be continued in the next semester for FYP2.

Week 13: Prepare proposal and updates

Objective for this week : To complete the Scheme of work (SOW) for FYP 1 and update the proposal.

for this week i do and update my proposal. i add 2 topics :
1. Chapter 2 = Literature revie
2. Chapter 3 = methodology

Week 12: Presentation FYP1 and prepare the proposal report.

Objective of this week: presentation about my project and proposal preparation.

For this week, i very excited to show my good presentation once few of week i research my project in FYP1. i have a preparation on the slide and show the slide time presentation in gemilang hall at 2pm.

This is me, ready to show my presentation slide time interview.

For my proposal, i started do the first chapter in this week.

in first chapter, consists of the parts is: 

1. ACKNOWLEDGEMENT

2. ABSTRACT

3. INTRODUCTION

4. PROBLEM STATEMENT

5. OBJECTIVE